Package Includes:

(1) Rockville PRO-D7 KIT 7 Mic Drum Kit w/Bass+Snare+Condenser Overhead Microphones
(1) Rockville Kick Drum/Guitar Amp Mic Stand, Steel Round Base+Fixed Boom+Rubber Pad
(1) Rockville RVMIC4 v2 Round-Base Pro Mic Stand w/ Metal Quick-Release Hand Clutch
(1) Samson Stand Mount Dual Mics Microphone Adapter For (2) Microphones
(7) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper

HOW To Set Up Your PRO-D7 KIT:

Video of PRO SERIES DRUM Microphones:

What’s Included:

(1) Bass drum mic
(4) Snare drum mics
(2) Overhead condenser mics
(7) Mic clips
(1) Aluminum travel/protective case with foam
Manual
Warranty card

Features of PRO-D7 KIT:

Steel grill

Aluminum body

Zinc alloy hardware

Fits any mic stands

Anti-wind filter inside the grill

Element: Dynamic

Polar Pattern: Cardioid

Frequency response is engineered to be perfect for kick drums

Studio quality performance make these perfect for recording or live shows

Sounds great even at high SPL levels

Rejection of unwanted noises

XLR Output

Integrated flexible mounting hardware

Large diaphragm delivers accurate low frequencies

Frequency Response: 30Hz - 12KHz

Sensitivity: -58dB±5dB(0dB=1V/Pa at 1KHz)

Output Impendence: 600O±30%(at 1kHz)

Microphone Length: 4.72 inches

Microphone Max. Diameter: 2.01 inches

Microphone Weight: 0.77 Lbs

Snare Drum Microphone:

Steel grill
Aluminum body
Zinc alloy hardware
Fits any mic stands
Anti-wind filter inside the grill
Element: Dynamic
Polar Pattern: Cardioid
Large diaphragm delivers accurate frequency response
Frequency response is engineered to be perfect for tom-toms and snare drums
Studio quality performance make these perfect for recording or live shows
Sounds great even at high SPL levels
Rejection of unwanted noises
XLR Output
Mounting hardware has a swivel joint with quick release latch for easy and flexible positioning
Frequency Response: 60Hz-13KHz
Sensitivity: -54dB±3dB (0dB=1V/Pa at 1KHz)
Output Impendence: 600O ±30% (at 1kHz)
Microphone Length: 4.53 inches
Microphone Max. Diameter: 1.61 inches
Microphone Weight: 0.44 Lbs

Overhead Condenser Microphones:

Overhead cardioid condenser microphone
Steel grill
Aluminum body
Anti-wind filter inside the grill
Element: condenser
16 MM large diameter cartridge has amazing sound
Polar Pattern: Cardioid
Large diaphragm delivers accurate frequency response
Frequency response is extremely flat and engineered to be perfect for cymbals and other drums
Studio quality performance make these perfect for recording or live shows
Sounds great even at high SPL levels
Rejection of unwanted noises
XLR Output
Mounting hardware has a swivel joint with quick release latch for easy and flexible positioning
Low mass diaphragm
Frequency Response: 70Hz-20KHz
Sensitivity: 13mV/Pa
Output Impendence: 2000 Ohms (at 1kHz)
Max SPL: 127dB(at 1kHz=1% T.H.D)
S/N ratio: 96dB
Power Supply: Phantom 48V or DC1.5V
Microphone Length: 8.46 inches
Microphone Max. Diameter: 1.06 inches
Microphone Weight: 0.22 Lbs

Features for Case:

Aluminum case holds all the microphones and mounts
Protective foam makes sure your mics stay in perfect condition when you travel
Carry handle makes it easy to carry the case from gig to gig
High quality case with good looking design
Buckle latch secures the case closed
Protective foam is molded for each microphone and clip
Dimensions of case: 19.1” x 13.4” x 3.94” inches

How To Set Up Your RKDS:

Videos of RKDS:

Description:

The RKDS is a multi-purpose mini mic stand. The most popular use of these are for kick drum mic stands, but there are so many other amazing uses for these. They really come in handy for any amp or instrument that has to be on the ground. You can use these to mic up a bass drum, kick drum, snare, guitar amp, or bass amp. (Certain bass players prefer to have a mic). These are also perfect for floor stage mics, as a desk mic, or for use on the dais table at parties and corporate events. Additional uses are for a stand-up bass, or for saxophone players (sitting). There is so many ways these little stands come in handy.

Our stand weighs twice as much as others on the market because these are super-sturdy and solid. The RKDS has a 10.2” Steel Round Base with a rubber pad that eliminates unwanted noises. It has a 21.4" fixed boom arm that provides precise positioning for your mic.

The stand adjusts from 18.7” to 28.7”. This bad-boy Weighs in at 6.6lbs. There is no better stand in its class at this price guaranteed!

And we topped it off with a scratch-resistant powder coated finish so the stand looks beautiful for life!

This uses a standard thread size of 5/8”inch.

Features:

Rockville Kick Drum/Guitar Amp Mic Stand With Steel Round Base, Fixed Boom and Rubber Pad
Low profile height adjustable microphone stand for kick drums and guitar amps
Heavy-duty steel round base with rubber pad provide extreme stability
Fixed boom arm provides precise positioning
Scratch-resistant powder coated finish

Specifications:

Booming length : 21.4" (54.5cm)
Height adjustment : 18.7"- 28.7" (47.5cm – 73cm)
Base Diameter : 10.2" (26cm)
Thread Size : 5/8"
Weight : 6.6 lbs (3 kgs)

About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

All About Your RVMIC4 V2:

How To Set Up Your RVMIC4 V2:

How To Set Up RVMIC4 V2 with Smartphone/Tablet Holder:

How To Set Up RVMIC4 V2 with IsoBox:

How To Set Up Your RVMIC4 V2 with a Dynamic Microphone:

How To Set Up Your RVMIC4 V2 with a Boom Arm:

How To Set Up Your RVMIC4 V2 with a Condenser Microphone:

Description:

New V2 with all-metal hand-clutch system!

This Rockville RVMIC4 v2 mic stand has an all-metal clutch system that allows you to instantly raise or lower the stand with one hand. It is the most convenient way to adjust a mic stand!

Our 1 inch diameter thick steel tubing is unmatched in strength and durability by most other brands!

The joints we use are made of aluminum. Most our competitors use plastic joints and mechanisms which will not last as long as metal.

We use a very heavy duty round base that’s got some serious weight to it! This makes the stand very sturdy. We also put thick form underneath the base to protect your floor. The diameter of the base is 9.84” inches. The total weight of this heavy-duty stand weighs in at 8.8 lbs.

For added convenience we added wire clips that allow you to route the wire cleanly.

Features:

Rockville RVMIC4 V2 Professional Round-Base Microphone Stand With Metal Quick Release Hand Clutch
New V2 model with full metal hand-clutch mechanism!
Weighted metal round base makes the stand extremely stable
Thick foam padding underneath the base protects your floor
One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!)
Adjustable Height Range without the mic clip: 38-61 inches
Aluminum leg joints
This mic stand is the easiest and quickest to adjust on the market!
The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube. This is about 50 % thicker than almost all other brands on the market making this one of the sturdiest stands in the world
100% steel construction and Aluminum joints! NO Plastic parts!
Standard 3/8” threading with 5/8” adapter
Includes mic clip
Cable guiding clip on the stand for running cables
Black Color
Top Tube Diameter: 0.75" inch
Lower Tube Diameter: 1" inches
Round base with a diameter of 9.84” inches
No complicated assembly required, simply turn and screw the stand into the base
This rock solid stand weighs in at 9.2 LBS!

Authorized Samson Dealer!

Description of SADMA2:

Mic In Stereo.
The Samson DMA2 Dual Microphone Adapter is the ideal accessory for utilizing stereo mic'ing techniques when recording, especially for orchestras, choirs and various other live and studio situations. The predominantly steel-constructed DMA2 can be connected to the top of any standard mic stand thanks to 5/8"-27 threading. From there, the adapter can hold two separate microphones via mic clips or boom arms with its 3/8" locking screws. These two screws can be adjusted to provide not only 360° of individual mic rotation, but also 2"–7" separation between the two mics. This allows you to find the appropriate mic placement for your particular recording application.

Features:

SAMSON Stand Mount Dual Mics Microphone Adapter For (2) Microphones
Dual microphone adapter ideal for stereo mic'ing techniques
Holds two mics (via mic clips or boom arms) with 3/8" locking screws
Adjustable screws offer 360° mic rotation and 2"–7" of mic separation for optimal placement
Connects to the top of any standard mic stand
5/8"-27 mic stand threading
Steel construction

Advantages of buying from an authorized seller:

Best prices - We sell all Samson Products at great prices
Full Factory Warranty
Lifetime Customer Service by Samson product experts
Guaranteed legitimate and authentic merchandise

Please note: If you purchase Samson from an un-authorized seller then you are taking a big risk. You will not have any manufacturer warranty, and there is no guarantee that the item is authentic, brand new, or even working.

Video of RCXFM20E-B:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable
XLR Connectors with Internal Strain Relief for Rugged Reliability
100% Copper Conductors for Enhanced Signal Clarity
90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
Length: 20 Ft
Color: Black

Drum Microphones

PRO‑D7 Drum Mic Kit + (4) Mic Stands Bundle

PRO‑D7 Drum Mic Kit + XLR Cables 7-Pack Bundle

PRO‑D7 Drum Mic Kit + Stands and XLR Cables Bundle

PRO‑D5 Drum Mic Kit + XLR Cables 5-Pack Bundle

PRO-D7 KIT